1 / 3
Pins for holding agrotextile, ground anchors for garden needs — zdjęcie 1
1 / 3

Pins for holding agrotextile, ground anchors for garden needs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When shop is too far away and shipping will take longer than printing :)

Ocena
5 / 5
Polubienia
10
Pobrania
57
Wydruki
1
Wyświetlenia
234
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I recommend printing from some more weather-proof material then PLA, like PET-G. 

Printed with army green PET-G from Nebula with 

at least 3 walls,

3 top and 3 bottom layers,

40% infill.

I did not use supports, but some slicers will suggest them.

Scaled them down to 75% and they are big enough.


They obviously have to be tough. I hammered them into the ground through the oak wood and no damage is visible.

I have used standard version (without Spikes) but added Spikes version just because I thought they may fly off during wind, but there's no way it's gonna happen.

After few days of windy weather holding strong. Seems to be well stuck in the ground.

Tagi