Pins for holding agrotextile, ground anchors for garden needs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When shop is too far away and shipping will take longer than printing :)
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 57
- Makes
- 1
- Views
- 237
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recommend printing from some more weather-proof material then PLA, like PET-G.
Printed with army green PET-G from Nebula with
at least 3 walls,
3 top and 3 bottom layers,
40% infill.
I did not use supports, but some slicers will suggest them.
Scaled them down to 75% and they are big enough.
They obviously have to be tough. I hammered them into the ground through the oak wood and no damage is visible.
I have used standard version (without Spikes) but added Spikes version just because I thought they may fly off during wind, but there's no way it's gonna happen.
After few days of windy weather holding strong. Seems to be well stuck in the ground.