Home Assistant Dashboard Frame for Thinkpad Twist s230u
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed picture frame to hold my old Thinkpad Twist s230u to the wall as a home assistant dashboard.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
3D printed picture frame to hold my old Thinkpad Twist s230u to the wall as a Home Assistant dashboard (12.5" touch screen). I'm guessing that this is hard to replicate exactly, but could maybe serve as a source of inspiration for others.
Frame was printed in 6 parts due to bed size limits, resulting in a lot of delicate filling and sanding before painting. A push button is added to operate the Thinkpad's power button from outside the frame. An exhaust duct leads the warm air away from the enclosure. A couple of brackets on the wall allow for easy mounting/dismouting using m4 countersunk bolts. I used a transparent power cable to make it stand out less agains the wall.
Onshape document: https://cad.onshape.com/documents/a3ddb777f1c853af24d31a81/w/1d918aad6b3fbeab2ddaaaf4/e/9058719b333ae9c7306805c1?renderMode=0&uiState=664763bcc963864b3edd202f