Medicine Cabinet Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a small shelf to organize things in my medicine cabinet, as it only has 2 shelves. This is about 300mm wide,…
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 223
- Wydruki
- 2
- Wyświetlenia
- 1408
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I needed a small shelf to organize things in my medicine cabinet, as it only has 2 shelves. This is about 300mm wide, 100mm deep, and about 185mm tall. It has a small lip so things can't fall forward. It's intended to be pushed flush against the back of a medicine cabinet.
Designed in TinkerCAD:
https://www.tinkercad.com/things/gybxr7P3faq-medicine-cabinet-shelf
Print Settings
Printer:
Hieha SX-4
Rafts:
No
No
Resolution:
0.4mm
20%
Filament: Generic PLA Green
Notes:
Printed on a Hieha SX-4 with a MicroSwiss all-metal hotend and a 0.6mm nozzle. You'll need a pretty big printer to accommodate its size.
Category: Organization