1 / 4
Dune Watering Thumper
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A functional 3D-printed replica of the Dune Thumper working as a watering system
- Ocena
- 5 / 5
- Polubienia
- 334
- Pobrania
- 491
- Wydruki
- 14
- Wyświetlenia
- 4425
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 14) (Komentarze: 20)Remiksy (1)Kolekcje (411)Powiązane
I recently watched Dune: Part Two and was captivated by the iconic Thumper.
Inspired by its design, I decided to create a functional 3D-printed replica with a twist: my Thumper serves as a unique watering system!
Here's how it works:
- Body: Acts as the water reservoir.
- Spike: Inserted into the ground, it has holes to diffuse water.
- Top Part: Floats on the water, indicating the water level inside the Thumper.
If you want, this is video of the modeling, assembling and the Thumper in action:
!! PRINTING TIPS !!
- Use at least 4 walls for ensuring water tightness for the body, the buoy and the spike
- The top.stl should be printed with fewer walls (2 or 3) and should be printed empty, with lighting infill (otherwise it will be too heavy and won't float)
- The parts should be printed following the orientation in this pic:
