1 / 3
Ender 3 v2 X Gantry fixture for Levelling Dual Z axis — zdjęcie 1
1 / 3

Ender 3 v2 X Gantry fixture for Levelling Dual Z axis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy Z rod alignment without measuring by fixing x gantry

Ocena
5 / 5
Polubienia
11
Pobrania
69
Wydruki
1
Wyświetlenia
523
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Aligning the gantry by putting some objects between the gantry and the bed causea problems because after the bed tram the gantry is again out of level. So it is better to fix the gantry to the ground qnd leveling or meahing the bed is easier.

A simple and lightweight tool for leveling X gantry to the printer base (not bed). It eliminates the need of using calipers, meters anything. It fixes the x gantry 13cm from the base, so you can adjust or level your Z axis rods and belts easily just by turning steppers to the point that they can not turn anymore, then fix screws and it is done.

I get rid of stringing and colliding issues by adjusting the gantry with these in my Ender 3 v2.

 

%15 cubic infill

3 perimeters

Pla

Tagi