Tektronix 2230 oscilloscope front cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-on front cover for 22xx series Tek oscilloscopes. in two halves.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 49
- Wydruki
- 2
- Wyświetlenia
- 311
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tektronix 2230 oscilloscope front cover
Snap on front cover for Tektronix 2230 oscilloscope. Printed in two halves plus clips and connector for glue. Based on an ebay listing for an authentic front cover, this should fit models: 2213, 2215, 2213A, 2215A, 2235, 2235A, 2236, 2220, 2221, 2221A, 2230, 2232, 2224. But might NOT fit models: 2225, 2205, 2211, 2212. That being said, I have designed it for my 2230 and can not test on the others because I don't have them.
Fits snugly on my 2230 with the time base knob on the x10 position and even with two T-BNC plugged on each input.
Two halves need to be glued together with the middle connector part for easy alignment and reinforcement. Clips to be printed sideways for strength and glued in the appropriate slots on the sides.
PLA is fine for the cover but clips and connector should be printed out of PETG or better.
The logo was changed from the one pictured to better reflect the one on the device.
Also provided the front cover in a single piece for larger printers or different splitting.