Liczymy pasujące modele…
Adapter for mounting a 2230 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2230 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
This is an original case looking like a folder logo we could find on different operating systems. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive…
This is an original case looking like an old floppy disk. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive ventilation, and has a hole shaped like…
Print at 0.2mm or 0.1mm layer height for accurate dimensions. Supports recommended on screw end only, SSD end does not need supports. Allows use of 2230 SSD in computers or other devices designed for 2280 SSDs with no mounting options for…
Found myself with an extra 2230 M.2 Drive and no way to secure it in my spare external enclosure. Any print I tried wasn't set up for the tight tolerances of the external enclosure. So I made these. They're as wide as the M.2 Drive,…
A simple M.2 2230 SSD holder based on M.2 2280 SSD Storage Holder 16 Count by ChOaD - Thingiverse
Very simple spacer to use a 2230 M.2 card in a heat sink and motherboard that holds a 2280 card. The Arctic M2 Pro heat sink reduced the temperature of the card from 65-75 C down to 50-55 C during heavy write tasks. This is only a spacer,…
Adapter to mount a M.2 2230 in a 2280 slot. I printed it in Jayo PETG with 3 walls.
Warning : it is very small and difficult to print correctly, monitor the printer to avoid any problems
A jig for cutting a 2280 NVMe SSD to make it a 2230 NVMe SSD Especially for hynix BC711
The goal in designing these was to achieve the maximum possible density in the smallest possible space, while retaining the ability to stack the containers so they fit into other Gridfinity systems. M.2 2280 holder 1x2 grid units Holds 6…
Overview This is a pretty small and slim extender to adapt a 2230 SSD to a 2242 slot. Specifically, for the 2242 SSD slot on the Lenovo ThinkPad E14 Gen5 (picture). For this the no-lip version is recommended. Note: For anyone coming…
Added the M.2 2230 variant, instead of the 2280 variant. Also took my own advice and changed the spacing for the slots from 2.4 to 2.0. Tested with SUNLU White PETG, I recommend printing with a brim.
JEYI Thermal Conductive Silicone Pads: https://s.click.aliexpress.com/e/_omRiFoe Recommended JEYI M.2 2280 SSD Heatsinks: https://s.click.aliexpress.com/e/_oER99GA https://s.click.aliexpress.com/e/_opsow18 There is multiple versions of…
I used generic PLA with 20% infill and ironing for a better finish, as well as supports. I hope you find it useful.
I have a 2230 M2 SSD and needed to intall it on a 2280 slot.
Added gridfinity bottom and made the slots shalllower as before the entire drive was even with top - so grippable now
Simple adaptor, which comes in handy if your computer does not have a mounting screw for NVMe M2 2230. It works with 2260 or 2242 mounting hole. Print Settings Printer Brand: Prusa Printer: MINI+ Supports: Doesn't Matter Resolution: must…
Adapter for mounting a 2230 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2230 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
Universal M.2 SSD Adapter (Multi-Format Caddy) This model is a comprehensive hardware compatibility solution designed to extend the life of your storage components. It is a rigid "Caddy" or frame that allows you to install…
Very simple model, but also very useful, at least for me. With everything with flash memory in low supply and crazy prices these days, the only cheap NVMe drives I found were 2230. I knew the motherboard of both the HP EliteDesk 800 G4…
This is an original case looking like a folder logo we could find on different operating systems. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive…
This is an original case looking like an old floppy disk. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive ventilation, and has a hole shaped like…
IMPORTANT YOU NEED THE WASHER TO PREVENT DAMAGE TO YOUR LAPTOP! I made this so I could put a B+M key M.2 NVMe SSD in the WAN slot on my Lenovo Thinkpad T14 Gen1 Ryzen laptop. If compatible the slot is wired for PCIe x2. If the WAN slot is…
Print at 0.2mm or 0.1mm layer height for accurate dimensions. Supports recommended on screw end only, SSD end does not need supports. Allows use of 2230 SSD in computers or other devices designed for 2280 SSDs with no mounting options for…
Found myself with an extra 2230 M.2 Drive and no way to secure it in my spare external enclosure. Any print I tried wasn't set up for the tight tolerances of the external enclosure. So I made these. They're as wide as the M.2 Drive,…
creation d'un fanduct semi circular modifier pour WANHAO D12/230 et D12/300....
A simple M.2 2230 SSD holder based on M.2 2280 SSD Storage Holder 16 Count by ChOaD - Thingiverse
Print Settings; Infill: 30% Lines 0.2mm Resolution Wall Count: 2 Top Layers: 2 Bottom Layers: 2 Material: Generic PLA 1.75mm Bed Adhesion: None / Skirt
Very simple spacer to use a 2230 M.2 card in a heat sink and motherboard that holds a 2280 card. The Arctic M2 Pro heat sink reduced the temperature of the card from 65-75 C down to 50-55 C during heavy write tasks. This is only a spacer,…
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
I like this model because it really grabs the M2 card. Other models i saw only have a small corner holding the card. I was afraid the drive could then fall out. But the model was only for 2242 so with the supplied Fusion model and my…
Wall mount for Bubendorff remote control (ref. 223026). I use double tape to fix the mount on the window frame. Proposed print settings : Filament : PLA Layer Height : 0.16 mm Line Width : 0.44 mm Infill Pattern : Cubic Subdivision Infill…
it's a tight fit but it should work. flexible adator for 2230 or 2260 cards. you should print it in ABS or in PETG under the cpu could get warm.
Made to fit this NVME SSD 2230 Enclosure from Aliexpress: Although my unit says “iRhasta” I believe that this is a OEM design sold under different names. I printed the clip laying sideways and with tree supports as shown: The finished…
Needs an M2x3 or M2x4 screw for attaching the SSD to the computer. Filament -> Cooling -> min print speed probably needs to be set to 3 or there will probably be defects on your printed part. Things will probably get pretty toasty in the…
I had an Intel Nuc NUC6I7KYK and noticed that it wouldn't accept a smaller m.2 SSD so I designed this little bracket which doesn't take long to print. Enjoy!
This is an adaptation of the m.2 ssd adapter by janek0809. I took their existing Fusion 360 file and edited it to fit an m.2 2230 ssd to a 2280 slot. I also filleted a bunch of sharp corners. The nice thing about this design is that it…
This is a hard shell for a common 2230 ssd enclosure found on Amazon. There are many different brands that white label this product, but I few I found are from qwiizlab, hagibis and gewokliy. These devices come with a silicon cover, but…
Simple bracket that mounts to the standoff screw for the M.2 slot. I didn't like how most options out there have an offset between the bracket screw hole and the drive's mounting edge and/or were too thick for standard M.2 mounting screws.
Tektronix 2230 oscilloscope front cover Snap on front cover for Tektronix 2230 oscilloscope. Printed in two halves plus clips and connector for glue. Based on an ebay listing for an authentic front cover, this should fit models: 2213,…
Extend an 30mm NVMe to 80mm. Work with a 0.7mm thick PCB. Category: Computer
M.2 ssd Adapter Set sizes 2230 to 2242, 2230 to 2260, 2230 to 2280, 2242 to 2280, 2260 to 2280
