Tousek RSR433 2M remote holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remote control holder for TOUSEK RSR433 2M 433MHz that can be mounted with double-sided tape in car.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 155
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got tired of finding this remote each time around different compartments of car so I decided to make a holder for it. It is actually easy to put it in as well as slide it out.
I used doublesided tape from AliExpress but feel free to use any other.
Best way to print it is with bottom up and use organic supports. You can try to use supports only for overhangs but I did not test that out.
EDIT: I added version that does not have brim on the “outisde” of holder.
I also added g-codes but I still believe that you should slice STL on your own.