USI Pro Parabolic Reflector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple parabolic reflector for holding a ~12mm microphone capsule using a magic arm or similar
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 1384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
This is a parabolic microphone reflector remixed and reworked in Onshape to accommodate a LOM Usi Pro microphone capsule and to be mounted using a magic-arm or similar.
Assembly is simple; print one of each half and glue together. Superglue or epoxy both work well.
The microphone should be mounted pointing towards the dish (backwards) and the cable should be zip-tied down either arm with a little slack (but care should be taken to avoid banging or loose bits making noise!) The microphone will need to be adjusted in-and-out a few mm to find the exact focal point of the dish.
Ideally; the dish should be spin-coated in a hard, acoustically reflective material, this will maximize the reflected audio and reduce back-pickup (from objects and handling BEHIND the dish)