1 / 3
Magnetic box for wet wipes - Three sizes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Don't like the plastic wrapping of your wet wipes package? Stressed by this thin plastic flap coming loose all over again?
Here you go - a handy box to store your wet wipes. Easy accessible with a sealing flap and easy refillable due to magnets!
BOM :
- 1x Pinted bottom part
- 1x printed top part
- 1x Printed flap
- 2x printed hinge
- 10x 6x3mm Neodym magnet
- ~31mm long piece of filament (1,75mm)
- …and some superglue
Instructions :
- Use a drop of superglue for each magnet (recommended!)
- Cut a 31mm piece of filament
- Push the filament through the hole in the flap, put both hinges to the ends
- Firmly press the hinges with the flap into the rectangular holes of the case top
Note :
- All parts should be printable without supports.
- I only printed and tested the small version. Printing the big version on your own responsibility.
UPDATE 08.02.2025 :
- Now in three sizes - SMALL, MIDDLE and BIG
- Small → Inner dimensions 140 x 90 x 56mm.
- Middle → Inner dimensions 140 x 110 x 56mm.
- Big → Inner dimensions 195x 110 x 56mm.
