Bosch Truvo / PMD7 universal holder for Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder that attaches to the IKEA Skadis pegboard using CSD Salzburg's Universal Skadis holder for the Bosch Truvo/PMD7
- Ocena
- 4,667 / 5
- Polubienia
- 6
- Pobrania
- 74
- Wydruki
- 3
- Wyświetlenia
- 215
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
While I liked the original model to hold my Bosch PMD7 - which is apparently also labeled Truvo sometimes - I'm really no fan of the T-Nuts used in the original model, because it requires additional hardware. Thus I prefer the Universal Skadis holder from CSD Salzburg and models using it, since all parts can be printed and separating holder and hook usually means that you can print without support.
My models use a rather tight fit on the skadis universal hook, since I prefer when the hook sticks to the holder instead of the pegboard. As such you can usually take the holder off the wall and they will stay in the holder. However you may need to apply a little force when mounting the hooks, but printing the hook in default settings in PLA gives more than enough stability for this little bit of abuse :)
To print this you need additionally two of Skadis_Universal_Hook.stl from https://www.thingiverse.com/thing:2853261/files