Color changing biohazard coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a coaster that features a color-changing inlay that responds to temperature changes.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a coaster that features a color-changing inlay. When a hot beverage is set down on the coaster, a biohazard symbol emerges. The color changing filament is M3D's Chameleon 3D Ink. Because it is subjected to heat, I made the coaster base from ABS.
Pretty straightforward assembly, just print the two parts in the desired color(s) and glue together. I also sealed the coaster with XTC-3D epoxy.
Print Settings
Printer Brand:
RepRap
Printer:
Makerfarm 12
No
Supports:
No
Printed at .2mm height with a .4mm nozzle
Infill:
25%, 1mm thick top and bottom layers
Notes:
Print as you see fit. Again, I would recommend going with ABS for the body because it will be subjected to hot beverages.
Post-Printing
After printing, I lightly sanded the body and logo. I glued the two pieces together and then sealed the entire coaster with XTC-3D epoxy.
Category: Kitchen & Dining