Color changing biohazard coaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a coaster that features a color-changing inlay that responds to temperature changes.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 44
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is a coaster that features a color-changing inlay. When a hot beverage is set down on the coaster, a biohazard symbol emerges. The color changing filament is M3D's Chameleon 3D Ink. Because it is subjected to heat, I made the coaster base from ABS.
Pretty straightforward assembly, just print the two parts in the desired color(s) and glue together. I also sealed the coaster with XTC-3D epoxy.
Print Settings
Printer Brand:
RepRap
Printer:
Makerfarm 12
No
Supports:
No
Printed at .2mm height with a .4mm nozzle
Infill:
25%, 1mm thick top and bottom layers
Notes:
Print as you see fit. Again, I would recommend going with ABS for the body because it will be subjected to hot beverages.
Post-Printing
After printing, I lightly sanded the body and logo. I glued the two pieces together and then sealed the entire coaster with XTC-3D epoxy.
Category: Kitchen & Dining