Prusa XL front camera holder for tripod-compatible devices
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As title says. It can mount any (light!) camera that has a tripod-compatible mounting socket at its bottom.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not the sexiest of all things but functional. I threw it together quickly to mount a Logitech C920 that I had around.
Print the things; no supports needed. If you're using the two printable fasteners instead of the real metal things, make sure they're sturdy. Print slow & hot & from something strong.
The model is fully printable with the exception of two 3030 roll-in t-nuts and two M3x16 bolts. You'll need these to attach the vertical arm to the printer's frame.
If you don't have t-nuts at hand you can print this or this.
Mounting should be straightforward. The vertical arm has a female M10 thread in the center of the spline lock.
Use a wide-angle camera; if it has autofocus make sure you can override it.