Prusa XL front camera holder for tripod-compatible devices
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As title says. It can mount any (light!) camera that has a tripod-compatible mounting socket at its bottom.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Not the sexiest of all things but functional. I threw it together quickly to mount a Logitech C920 that I had around.
Print the things; no supports needed. If you're using the two printable fasteners instead of the real metal things, make sure they're sturdy. Print slow & hot & from something strong.
The model is fully printable with the exception of two 3030 roll-in t-nuts and two M3x16 bolts. You'll need these to attach the vertical arm to the printer's frame.
If you don't have t-nuts at hand you can print this or this.
Mounting should be straightforward. The vertical arm has a female M10 thread in the center of the spline lock.
Use a wide-angle camera; if it has autofocus make sure you can override it.