Optical fiber splitter spool support (50:50) (UPDATED!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an optical fiber splitter spool support for 50:50 splitters. It is based on Thorlab's TN1550R5A2 splitter.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an optical fiber splitter spool support for 50:50 splitters. It is based on the TN1550R5A2 splitter from Thorlabs and similar models. The pocket on the upper part is made to accommodate the sleeve. The elongated holes above and below the ‘50:50’ text are to fix the support on an optical table with M6 screws. I have 50:50, 90:10, 99:1, and PBS splitters versions. Check them out!
I significantly improved the design. It is much harder for the fiber to disentangle itself from the spools.
As for the printing, I printed the support using plain PLA. There is no need for any support.
Enjoy.