Optical fiber splitter spool support (50:50) (UPDATED!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an optical fiber splitter spool support for 50:50 splitters. It is based on Thorlab's TN1550R5A2 splitter.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 68
- Makes
- 0
- Views
- 536
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
This is an optical fiber splitter spool support for 50:50 splitters. It is based on the TN1550R5A2 splitter from Thorlabs and similar models. The pocket on the upper part is made to accommodate the sleeve. The elongated holes above and below the ‘50:50’ text are to fix the support on an optical table with M6 screws. I have 50:50, 90:10, 99:1, and PBS splitters versions. Check them out!
I significantly improved the design. It is much harder for the fiber to disentangle itself from the spools.
As for the printing, I printed the support using plain PLA. There is no need for any support.
Enjoy.