Screws with threaded holes for Elegant Screwiverse Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screws with threaded holes for Elegant Screwiverse Insert for sheet metal and wood screws
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm publish as a separate model the threaded hole screws for the Elegant Screwiverse because that's where a lot of the parts became and not everyone would use them.
I've made screw threads for sheet metal and for wood.
There are also threads for my favorite drywall screws (3.5 DT*): Trumpet Head Double-threaded Drywall Screw
The sheet metal threads are for screws such as DIN 7981, DIN 7982 or DIN 7983.
The wood threads are for screws such as DIN 95, DIN 96 or DIN 97.
| SHEET THREADS | PITCH | WOOD THREADS | PITCH | |
|---|---|---|---|---|
| ST2.2 | 0.8 | 1.6 | 0.7 | |
| ST2.9 | 1.1 | 2 | 0.9 | |
| ST3.5 | 1.3 | 2.5 | 1.1 | |
| 3.5 DT* | 2x3 | 3 | 1.4 | |
| ST3.9 | 1.3 | 3.5 | 1.6 | |
| ST4.2 | 1.4 | 4 | 1.8 | |
| ST4.8 | 1.6 | 4.5 | 2 | |
| ST5.5 | 1.8 | 5 | 2.2 |
Please note that for threading to work your printer must be calibrated for accurate holes. For me, these threads work fine with a setting of X-Y hole compensation: 0.1 (OrcaSlicer).