Raspberry Pi 5 quality case, with VESA mount (V3.6)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a Raspberry Pi 5 with VESA mount (75mm x 75mm) screw-less
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 410
- Wydruki
- 1
- Wyświetlenia
- 1833
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Just another case for Raspberry PI 5 with or without active cooler.
Because the fan cooling there are not too many ventilation holes in the case.
Slightly everything holds together without any screws.
That is nice if you must open and close it many times.
But definitely I recommend the two screws in the front (2 x 2.5mm/8mm, countersunk ).
The other four screws are also 2.5mm.
SD card can be handled easily from the back.
Change on v3.5 : Connectors (specially HDMI) go closer to the board (about 0.7mm).
Support & Feedback
I share my designs purely for fun and don't make any money from this. If you like this model or find it useful, please consider leaving a Like (❤)!
Posting a Make or leaving some feedback in the comments makes my day and helps me improve future designs. Happy printing! 🚀