Threaded Bottom Bracket Guider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guides the bottom bracket while installation and eliminates the chances of getting cross threaded
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Suitable for Threaded Bottom Brackets 68mm/73mm
This is REPAIR (FOR LESS SEVERITY) / GUIDE TOOL
This can be installed on to the non drive side of the Bottom Bracket and when the bottom bracket is inserted from the Drive Side, the installed Guide Adapter makes sure that the action is linear and eliminates the chances of getting the bottom bracket cross threaded.
Incase of minor or slightly cross threaded bottom bracket frame, this can even be used as a rescue tool by force tightening of the Bottom Bracket in the frame. ( Caution : May not help in severely cross threaded cases )
The with is of 5mm, if more required it can be stacked by consecutively inserting the additionally printed ones.
Measurements:
ID : 31mm
OD : 33mm
WIDTH : 5mm
Printed on Elegoo Neptune 4 Plus with Creality PETG Filament
- 0.4 nozzle
- 0.12 layer height
- 100% Infill
- Nozzle Temp 240 C
- Bed Temp 70 C
- Print Speed 60mm/s
- Cooling 30%