1 / 5
Circle Cutting Jig for plunge router
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed for a project where I need to cut loads of holes out of wood with a plunge router. The idea is it…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
This was designed for a project where I need to cut loads of holes out of wood with a plunge router.
The idea is it hooks into 2 pieces of m8 threaded rod, which fits into the guide holes in the router.
Instructions
- The attached STL is for my router, which has 8mm holes that are 84mm apart.
- Fix a 608 bearing in the central bearing hole, and fit the central piece through the middle of it.
- Attach two pieces of M8 threaded rod through the 8mm Holes, and bolt on both sides.
- Insert the threaded rod into the guide holes in the router. the distance between the central hole and the inside of the router bit is the radius of your hole.
- Put a screw through the central piece and into the center point of the piece you are cutting, and cut!