1 / 5
Circle Cutting Jig for plunge router
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was designed for a project where I need to cut loads of holes out of wood with a plunge router. The idea is it…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 0
- Views
- 610
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This was designed for a project where I need to cut loads of holes out of wood with a plunge router.
The idea is it hooks into 2 pieces of m8 threaded rod, which fits into the guide holes in the router.
Instructions
- The attached STL is for my router, which has 8mm holes that are 84mm apart.
- Fix a 608 bearing in the central bearing hole, and fit the central piece through the middle of it.
- Attach two pieces of M8 threaded rod through the 8mm Holes, and bolt on both sides.
- Insert the threaded rod into the guide holes in the router. the distance between the central hole and the inside of the router bit is the radius of your hole.
- Put a screw through the central piece and into the center point of the piece you are cutting, and cut!