1 / 4
Strong hat and coat hook for bathroom doors etc (guerrillahook) — zdjęcie 1
1 / 4

Strong hat and coat hook for bathroom doors etc (guerrillahook)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Guerrilla Hook is a small, 3D printed hat and coat hook designed to be placed into a public toilet.

Ocena
0 / 5
Polubienia
4
Pobrania
50
Wydruki
0
Wyświetlenia
378
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

Whaaaat?

Guerrilla Hook is a small, 3D printed hat and coat hook designed to be placed into a public toilet for visitors to enjoy.

Website: https://guerrillahook.com/

You can use it for coats, hats, (small) bags, or anything else you need to hang.

We recommend using 3M 5952 tape to attach the hook as it's strong, removable and shouldn't cause any damage to surfaces.

Keep one in your bag for when you're caught short…

Print instructions:

  • This prints very, very strong with a typical PLA+
  • Set the bed temp a little higher to avoid having to use a brim (I use 65c)
  • Extrusion multiplier: 1.1 
  • Nozzle (all layers): 215
  • Later height: 0.15
  • Use tree/organic supports (pictured) for cleaner text, they should easily detach 
  • If you're having problems with strength/layer adhesion, avoid input shaping and go slower.
  • You may need to adjust these depending on your setup and material, but this should lead to a very strong hook that is not easily broken by hand. 

 

 

Tagi