1 / 4
Strong hat and coat hook for bathroom doors etc (guerrillahook) — image 1
1 / 4

Strong hat and coat hook for bathroom doors etc (guerrillahook)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Guerrilla Hook is a small, 3D printed hat and coat hook designed to be placed into a public toilet.

Rating
0 / 5
Likes
4
Downloads
50
Makes
0
Views
378
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution

Whaaaat?

Guerrilla Hook is a small, 3D printed hat and coat hook designed to be placed into a public toilet for visitors to enjoy.

Website: https://guerrillahook.com/

You can use it for coats, hats, (small) bags, or anything else you need to hang.

We recommend using 3M 5952 tape to attach the hook as it's strong, removable and shouldn't cause any damage to surfaces.

Keep one in your bag for when you're caught short…

Print instructions:

  • This prints very, very strong with a typical PLA+
  • Set the bed temp a little higher to avoid having to use a brim (I use 65c)
  • Extrusion multiplier: 1.1 
  • Nozzle (all layers): 215
  • Later height: 0.15
  • Use tree/organic supports (pictured) for cleaner text, they should easily detach 
  • If you're having problems with strength/layer adhesion, avoid input shaping and go slower.
  • You may need to adjust these depending on your setup and material, but this should lead to a very strong hook that is not easily broken by hand. 

 

 

Tags