Small Footprint Corne V2 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Small Footprint Corne V2 Case
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 1044
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A Small Footprint Corne V2 Case
The aim was to create a case that is not too bulky to keep the Corne footprint small.
Case in pictures printed out of eSun Matte Light Blue PLA on Bambu X1C, with .12mm layer height.
Uses 10x 7mm M2 standoffs and 20x 5mm M2 screws total.
Has holes in the base for FOUR 9mm x 1.6mm N45 magnets to be superglued into, to attach the two sides together when traveling. Need 8x total.
Switch Plate also included.
OPTIONAL
Feet can be held on using magnets. Needs 8x magnets total for 8 feet.
When traveling, feet can be attached to tag that is attached to TRRS connector. Needs 4x magnets total.
Sound Dampener includes but slightly improves quality of sound of MX boards when placed between PCB and Switch Plate. I have printed with TPU and sounds better than nothing.