Simple Playing card holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Simple and easy to print playing card holder for about 15 cards ( 5-6 cards overlapping at any point )
- Ocena
- 4 / 5
- Polubienia
- 19
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 608
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- GNU General Public License v3.0
This is a very simple Cardholder designed to fit about 15 cards ( varies due to different card shapes and sizes )
Optimally printed standing without any support ( printing flat on the bed could lead to overhang artifacts due to the curvature ). if you struggle with bed adhesion i recommed using a Brim to keep the model sticking to you printbed.
i recommend to print it with an higher value of infill to add more stability ( even though it should work without any as the center of mass is held “inside” of the model )
i Printed mine with 0.2mm layer height and 100% infill with Bambu Pla ( uses approx. 20g of filament )
If you want to customize it to fit your needs, i included the files for Autodesk Fusion. the parameters should be self explanatory, but if you need help, feel free to contact me or ask in the comments.