Simple Playing card holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Simple and easy to print playing card holder for about 15 cards ( 5-6 cards overlapping at any point )
- Rating
- 4 / 5
- Likes
- 19
- Downloads
- 159
- Makes
- 0
- Views
- 608
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- GNU General Public License v3.0
This is a very simple Cardholder designed to fit about 15 cards ( varies due to different card shapes and sizes )
Optimally printed standing without any support ( printing flat on the bed could lead to overhang artifacts due to the curvature ). if you struggle with bed adhesion i recommed using a Brim to keep the model sticking to you printbed.
i recommend to print it with an higher value of infill to add more stability ( even though it should work without any as the center of mass is held “inside” of the model )
i Printed mine with 0.2mm layer height and 100% infill with Bambu Pla ( uses approx. 20g of filament )
If you want to customize it to fit your needs, i included the files for Autodesk Fusion. the parameters should be self explanatory, but if you need help, feel free to contact me or ask in the comments.