60° Heatbed Cable Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heatbed Cable cover to reduce the footprint of the Prusa i3 MK3, so it fits inside an enclosure.
- Ocena
- 4,783 / 5
- Polubienia
- 479
- Pobrania
- 6011
- Wydruki
- 94
- Wyświetlenia
- 22 214
- Oceny
- 83
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this heatbed cable cover, because the ones available were designed to complex and too far off the original design. I needed an angled cable cover to reduce the length of the printer, so I can fit it inside an IKEA Platsa cabinet. But it's also great to stop your printer from crashing the heatbed cable into the wall while standing on a desk.
The actual mountig of my design ist similar to the one supplyed by prusa. I increased the length of the cover by 6mm, so the cables have room inside to bend without modifications on the power terminals. I got rid of the second 3D printed part from underneath, because the space for screws was to tight. Instead the cables can be secured by a 2,5mm x 1mm zip tie trough a assigned channel in the part.
Print settings:
- 0,2mm layer height
- 100% infill
- 3 perimeters
I printed it in PETG and it works perfectly well and serves it's purpose.
As always, happy printing!