1 / 2
Lid for 30x30 fan, OLED, and PiCamera Cable, for modular RPi Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fits a 0.96" IPS display and 30x30x7mm fan.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix from: https://www.printables.com/model/106225-modular-snap-together-raspberry-pi-2b3b3b4-case-w-
This fits a 0.96" IPS display, 30x30x7mm fan, and a pi camera cable. It's a pretty tight fit though, I had to trim the dupont connectors to allow the wires to bend sooner so they didn't interfere with the top.
Specific hardware used:
0.96" OLED: https://www.aliexpress.com/item/1005005124529319.html
Fan: https://www.aliexpress.com/item/4000431132101.html
This guide is a good start to interfacing with the display: https://jakew.me/st7735-pi/