1 / 2
Lid for 30x30 fan, OLED, and PiCamera Cable, for modular RPi Case — image 1
1 / 2

Lid for 30x30 fan, OLED, and PiCamera Cable, for modular RPi Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This fits a 0.96" IPS display and 30x30x7mm fan.

Rating
0 / 5
Likes
3
Downloads
31
Makes
0
Views
241
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Remix from: https://www.printables.com/model/106225-modular-snap-together-raspberry-pi-2b3b3b4-case-w-

This fits a 0.96" IPS display, 30x30x7mm fan, and a pi camera cable. It's a pretty tight fit though, I had to trim the dupont connectors to allow the wires to bend sooner so they didn't interfere with the top.

Specific hardware used:

0.96" OLED: https://www.aliexpress.com/item/1005005124529319.html

Fan: https://www.aliexpress.com/item/4000431132101.html 

This guide is a good start to interfacing with the display: https://jakew.me/st7735-pi/

Tags