UPDATED 29Dec2024: Gridfinity Storage Cover(s) - Configured in Fusion 360
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for the Gridfinity Storage system. I modeled it in Fusion360, and configured it to give a few sizes.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 110
- Wydruki
- 2
- Wyświetlenia
- 371
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATED: 29Dec2024: Per request by @ThiDav_2532052 (Good suggestion, thank you) , I added a version with a raised handle to more easily get your fingers on it. This new version does not allow for stacking since the top of the cover is no longer flat. There is the Fusion file as well as STL and STEP (find in the ZIP files.).
This is an addition to the Gridfinity storage system designed by Zach Freedman of Voidstar Labs who “stole” it from Alexandre Chappel. I made this storage box cover with flexibility in mind. I have remodeled pretty much all the features, and setup configuration in Fusion360 so you can do whatever size cover you want with the Fusion360 file. I can't be the only one out there with an addiction to 3D printing and Gridfinity…..can I?
There is a label inset that is 0.2mm deep, 8mm wide (for ¼" labels), and the length varies according to the size of the cover. I have included F3D, STL, and STEP files of all covers from 1x1 to 3x3. As you'll see, the models come with the label depression in both directions so you don't have to twist your head to read a label.
I printed mine in Prusament PLA - Galaxy Black with 0.20mm layer height. No supports needed.