1 / 7
Schraubschelle für Installationsrohr (20mm) Filament Regal auf Holzbrett - Clip for easy and cheap Filament Shelf — zdjęcie 1
1 / 7

Schraubschelle für Installationsrohr (20mm) Filament Regal auf Holzbrett - Clip for easy and cheap Filament Shelf

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This clip is easily srewable into any wood or other shelf rack, to install with a pvc pipe (German: Installationsrohr).

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
210
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

This little clip, combined with some screws (countersunk head), was the cheapest way to line-up all my filament spools in a vertical manner whilst having them readily available for printing. 

I also enjoyed the other ideas, such as the very heavy metal version of the Reprack, but couldn't easily get my hands on the metal pipes. 

Especially the pvc pipes (⌀20mm) are at less than 1€/m available at every hardware store in Germany. So I thought, I'll share it here, in case someone else wants a cheap filament shelf too. 

The pipes snap snuggly into the clip, after the clip is screwed to the board. I used 3 clips per 1 meter of pvc pipe.

Printed in PLA with 15% infill, on Prusa MK4. Please share your self-build storage racks in the “Makes” Section, if you use this little thingy. 

Acknowledgments: Thanks to @RebeccaS_1680478 who supported the digital design process of making the model. 

__

Dieser kleine Clip war in Kombination mit einigen Schrauben (Senkkopf) die günstigste Möglichkeit, alle meine Filamentspulen vertikal auszurichten und sie gleichzeitig zum Drucken griffbereit zu haben. 

Mir gefielen auch die anderen Ideen, wie zum Beispiel die sehr schwere Metallversion des Repracks, aber ich konnte keine Metallrohre zeitnah bekommen. Vor sind die PVC-Rohre (⌀20mm) durchschnittlich in jedem Baumarkt in Deutschland für weniger als 1€/m erhältlich. 

Also dachte ich, ich teile diesen kleinen Helfer hier, falls noch jemand ein günstiges Filament Regal schrauben will. Die Rohre rasten passgenau in den Clip ein, nachdem dieser an der Platte festgeschraubt wurde. 

Ich habe 3 Clips pro 1 Meter PVC-Rohr verwendet. 

Gedruckt in PLA mit 15 % Füllung, auf Prusa MK4. Bitte teilen Sie Ihre selbstgebauten Lagerregale im Abschnitt „Marken“ mit, wenn Sie dieses kleine Ding verwenden. 
 

Danksagungen: Vielen Dank an @RebeccaS_1680478, die den digitalen Designprozess zur Herstellung des Modells unterstützt hat.

Tagi