HueForge Owl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Owl picture created with HueForge. Its dimensions are 100x180x2,24mm.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 142
- Wydruki
- 5
- Wyświetlenia
- 673
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing instructions:
If you want to scale it, do it only with x- and y- axis. Z-height must stay the same.
Print with 100% infill
First layer height: 0,2mm
Other layer heights: 0,12mm
First color change at layer 6 (0,80mm), second at layer 11 (1,40mm) and third at layer 15 (1,88mm).
You can use any color combination. In my picture I used the following filament:
- Sunlu PLA+ Black
- Sunlu PLA Fuchsia
- Sunlu PLA+ Sunny Orange
- Sunlu PLA+ White
A little tip: You can use a small cube as a wiping tower to ensure that the filament is printed correctly. I have included such a cube in the .3mf file. Also check the printing order: the cube must be printed first on each layer.