HueForge Owl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Owl picture created with HueForge. Its dimensions are 100x180x2,24mm.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 142
- Makes
- 5
- Views
- 673
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing instructions:
If you want to scale it, do it only with x- and y- axis. Z-height must stay the same.
Print with 100% infill
First layer height: 0,2mm
Other layer heights: 0,12mm
First color change at layer 6 (0,80mm), second at layer 11 (1,40mm) and third at layer 15 (1,88mm).
You can use any color combination. In my picture I used the following filament:
- Sunlu PLA+ Black
- Sunlu PLA Fuchsia
- Sunlu PLA+ Sunny Orange
- Sunlu PLA+ White
A little tip: You can use a small cube as a wiping tower to ensure that the filament is printed correctly. I have included such a cube in the .3mf file. Also check the printing order: the cube must be printed first on each layer.