Lilygo T-Echo Shell w/ Improved Loop and Optional Quick Clip Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shell for the Lilygo T-Echo Communicator that prevents accidental button presses and has Quick Clip support.
- Ocena
- 4,8 / 5
- Polubienia
- 28
- Pobrania
- 160
- Wydruki
- 6
- Wyświetlenia
- 1973
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is for the Lilygo T-Echo Communicator. I use it as a Meshtastic node that I can carry on me all the time to connect to nodes as I go around the place.
There are two versions, one with the Quick Clip on the shell, and one without. Check out the Quick Clip system for components to attach the Shell to! I use it to clip it on my backpack.
This should be printable with no supports, with any hard material of choice. Maybe not PLA if you plan to leave it out in direct sunlight or high temperatures for too long. I found having 4 walls made the parts have good strength.
For the back Clip, use a brim to ensure the part doesn't tip over as it prints. Two M3 screws 8-10mm in length should hold the Shell and Clip together.
Update 7/2: Added an .stl for the Shell