1 / 12
Custom Mods for ProfessorBoots DIY RC Excavator
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aesthetic modifications resembling Kobelco excavators. Do see pictures for closeups!
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 445
- Wydruki
- 1
- Wyświetlenia
- 4273
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (0)Kolekcje (74)Powiązane
I love excavators, and ProfessorBoots did an amazing job in designing an RC model of one. These aesthetic modifications are designed to resemble a more realistic excavator. I chose Kobelco as it is a personal favourite. Do comment if you have any questions or requests. A PS4 Controller code is also listed below for those interested.
Note: I have not finished building the model, apologies for any hiccups if there is any!
Guide
- Use a torch or flame to get rid of white cut marks from supports/brims. Especially useful for the edges of the filleted Rear Cover and Step
- Use only a tiny amount of superglue to attach the Ladder onto Step Mat and hold in place for a few seconds to let the glue cure.
- The modified models does not alter any parameters that may affect the building process. However Rear Cover and Lower Body goes together due to the filleted rear.
- Print the Step Mat, Rear Cover Mat and Ladder in PLA
Future Plans
- Rear Cover equipment rack to store props
- Bucket Hook
- White letterings for “Kobelco” on Main Boom and Rear Cover
See below for list of modifications..