1 / 2
skypivot incolor (天枢) crank armor / boot / protector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
protectect your fancy unnormal curved crank
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
the thin edge should be placed on heatbed, sothat the round hole will facing the sides.
if it wont fit, try to use the slicer to expand or shrink. it is caused by the printer.
infill wont matter that much. but layerheight might effect the hole's print quality. lower is better.
no printing's version is available, pls PM
pls. no commercial.
请勿商用