Flashforge Adventurer 5M Minimalistic Cable Fixation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, minimalistic cable Fixation for the Flashforge Adventurer 5M.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 1068
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this Cable Fixation / Cable Holder because I only print out of my Filament Dryer and don't need a big drag chain for one single cable. With this, the cable doesn't get squeezed inside the printer and is kept in it's natural position. Keep in mind, that the cable still needs to be stabilized on the other end - in my case it's attached on the PTFE tube coming from my Filament Dryer with one of the included hooks.
Print it in the orientation the .stl is already in.
Installing it can be a little bit tricky: First screw the holder down (I used the 2 extra screws included with the printer) and then carefully guide the cable through the channel.
Take your time and be patient as to not damage the cable.
It's possible to bend the Holder a little bit, so you can get the cable in easier.