Hypercube Evo to Voron Afterburner Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided I wanted to print out the Voron Afterburner and try it out on my Hypercube Evolution. I quickly made up this…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I decided I wanted to print out the Voron Afterburner and try it out on my Hypercube Evolution. I quickly made up this mounting adapter to give it a shot. The part in green in the pictures is the actual adapter. I have the linear rail setup on my HEvo but this should work with the standard adapter just fine. I have not incorporated any sort of ABL but plan on adding support for my BLTouch when I have time.
I printed it out with a 0.6mm nozzle, no supports, 3 walls and top and bottom ( 2.4mm for each ) and it worked out just fine.
This does require 3 of the M3 brass melt-in inserts.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: 3D Printer Parts