Graco Jogger Kids Tray Cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup insert for the removable tray on Graco Jogger.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
We lost the cup inserts for the kid tray of our Graco Jogger on a flight and wanted to gain this functionality again. I designed and printed a two-piece cup insert which fits into the holes in the kid tray.
I printed this in ASA, and I would generally recommend a heat/UV resistant material due to the nature of the product it is to be used in conjunction with. The top and bottom snap together and work just fine in that way. I used Weldon4 to “glue” the top and bottom into one piece. The top is keyed and has a slightly wider ring to keep it in place in the tray.
I designed this to be 2 pieces as to not require supports when printing with more difficult materials than PLA.
I printed this with a .6mm nozzle and .32mm layer height and it works great, so it should work with any finer settings.1
Feel free to modify this back into one piece if you want.