Graco Jogger Kids Tray Cup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cup insert for the removable tray on Graco Jogger.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 370
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
We lost the cup inserts for the kid tray of our Graco Jogger on a flight and wanted to gain this functionality again. I designed and printed a two-piece cup insert which fits into the holes in the kid tray.
I printed this in ASA, and I would generally recommend a heat/UV resistant material due to the nature of the product it is to be used in conjunction with. The top and bottom snap together and work just fine in that way. I used Weldon4 to “glue” the top and bottom into one piece. The top is keyed and has a slightly wider ring to keep it in place in the tray.
I designed this to be 2 pieces as to not require supports when printing with more difficult materials than PLA.
I printed this with a .6mm nozzle and .32mm layer height and it works great, so it should work with any finer settings.1
Feel free to modify this back into one piece if you want.