Propane Tank Regulator Collar Wrench for Weber Grill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A short and thin basic wrench to provide easier grasp of the collar between the propane tank and regulator.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Sometimes I find it hard to grip the collar around the propane tank. I wasn't able to find one for a standard Weber regulator. This is only 10mm thick which allow it to slide in between the regulator and the collar. It is just long enough to give a little extra grip.
Best results are with 6mm walls, top and bottom using Gyroid infill at 25%. Although any filament will work, the best results are with stiff and hard filaments such as PC or ABS. The photo I showed was PC.
This will likely work for other regulator hoses not just Weber but it was only tested on a Weber.