Propane Tank Regulator Collar Wrench for Weber Grill
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A short and thin basic wrench to provide easier grasp of the collar between the propane tank and regulator.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 48
- Makes
- 0
- Views
- 276
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Sometimes I find it hard to grip the collar around the propane tank. I wasn't able to find one for a standard Weber regulator. This is only 10mm thick which allow it to slide in between the regulator and the collar. It is just long enough to give a little extra grip.
Best results are with 6mm walls, top and bottom using Gyroid infill at 25%. Although any filament will work, the best results are with stiff and hard filaments such as PC or ABS. The photo I showed was PC.
This will likely work for other regulator hoses not just Weber but it was only tested on a Weber.