Soil press to grow seedlings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily grow your own seedlings using this soil press.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 600
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Soil press
Use these parts to press vegetable soil, compost or similar into nice little blocks to grow your seedlings.
Printing
Printing is easy. Choose what ever material you like (PLA works fine) and note the orientation of the parts. Nothing else must be looked out for.
Assembly
Add eight heat set inserts M3 into all the boreholes on top and at the bottom of the plunger part. Afterwards use some screws (see below) to attach the handle as well as one of the tips. There are three tips available at the moment. A flat one, one with a bellow and a fancy one. The bellow and fancy tip both leave "dents" in the pressed soil block where the seeds can be put. Cover up the dents with some loose soil and keep them moist until the seeds sprout. Plant the soild blocks with the seedlings in a raised bed or similar as soon as they have reached a sufficient size.
Hardware
- 8 pieces heat set insert M3
- 4 pieces allen screw M3x10mm
- 4 pieces countersunk screw M3x10
Make your own
Build/print your own tips! The dimensions for the interface of the plunger is shown below or modify the step files of the provided tips.
