Sony Alpha 6000 Selp1650 lens hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Still allows the use of filters on the kit lens of the Sony Alpha 6000.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 991
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Sony Alpha 6000 came supplied with a SELP1650 lens but without a lens hood. The lens hood I designed can be placed over the extended objective (when the camera is switched on) and still allows the use of filters, e.g. a polarizing filter with a diameter of up to 52 millimeters.
It is a simple friction fit, so the tolerances are relatively tight to prevent slipping when in use. Depending on the printer you are using and its tolerances, it may be necessary to make some further adjustments with some sandpaper after printing. The model should be printed with supports. Organic supports have worked very well for me.