Water hose to USB adapter / converter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for better electricity flow.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 1398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
I made this WATER to USB adapter originally as an out of season April fool's joke.
Additionally to 3D printed parts, you need USB-A female adapter similar to the one on pictures.
Tolerances should be ok even at stock printer settings, the adapter can be disassembled pretty easilly.
Originally based off of this picture (don't ask me how I found it, you wouldn't believe it):
INSTRUCTIONS:
You need basic USB-A female cable, like the one on the picture.
01.) If you want to paint or spray your parts, now is the time!
02.) Slide the SLEEVE piece through the adapter and then fit the serrated WASHER over the cable.
03.) Slide MAIN Part over the adapter and press-fit all the parts together.
04.) Test if the cable stays in place. If it doesn't, use glue gun.
05.) Enjoy! (This step is mandatory)
Printed with Prusa MINI+, standard 0.2 Layer Height settings.
If you have any suggestions, let me know. I can do similar models if you provide screenshots.
Be creative :)