R50-R53 Mini Cooper phone mount with boss
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone mount with a boss for a threaded ball for Mini Cooper
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 206
- Wydruki
- 0
- Wyświetlenia
- 2636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a phone mount for R50-R53 Mini Cooper.
It bolts in place of the normally broken cup holder. You didn't need that cupholder anyways, this is way better.
The holder has a boss with a hole that can be tapped or you can press a threaded insert in. In my case, I tapped it for a ¼"-20 threaded ball and attached the cheapest, crappiest phone holder on Amazon. Even the cheap holder holds my iPhone up under, uh, “spirited” driving conditions.
I printed with ASA using minimal painted supports on the boss. At 15% infill it cracked, so I reprinted with 50% adaptive cubic which is likely overkill but it's holding up just fine.