Liczymy pasujące modele…
This is a remix of the excellent Gen #1 (R50, R52 & R53) Mini Cooper phone mount by weber395 (https://www.thingiverse.com/thing:4107581). I wanted a simpler version with a ball mount. fits same as the original, pretty much snaps into…
MR128, MR62 and MR52 bearings.
This cupholder design solves the issues with the horrible cupholders in the first gen Mini Coopers. These have inserts to hold everything from big handled travel mugs all the way down to a skinny red bull can. Having used the original…
Created this to allow for installation of the Power Acoustik CP-71W in my R53 Mini Cooper. The radio is a little taller than usual and the regular dash kit (Metra 99-9302) has two guides that stick out on the top and bottom, not allowing…
The locomotive consists of parts, which allows it to be printed in different colors. The wheels turn but the drive may lock them. Glue is needed to assemble the model This is not a collector's model. Can help with assembly…
The original clips on the window regulator cables broke when I was trying to replace the regulator in my Mini Cooper R52. The aftermarket regulator came with clips that clearly did not fit, so I modeled the original clip to print myself.…
A common upgrade for 1st gen MINI Coopers is to swap out the steel trailing arms for the cast aluminum arms on the 2nd gen cars. In order to continue using your first gen speed sensor that inserts into the new trailing arm, you need a…
This model was too big for my printer (Bambu P1S,) and I didn't need the phone holder. I split it in half, added pegs and holes, and made a tab that fills the phone holder slot and more firmly keeps this thing together. If you really want…
Print and thread a copper wire through the holes in the bottom. Pay attention to what is + and - of your LR44/SR44 battery. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament:…
Slightly extended version of NiiWek's nut wrench for a bit of extra torque and reach
This Radio blanking plate is based my other model https://www.printables.com/model/1249402-mini-cooper-r50-r52-r53-flat-radio-dash-kit Print with at least 20% infill. Things left to do - make both sides symmetrical.
Tried to Print in PETG and ASA. I could not get ASA to work without warping. My final product was printed in PETG with textured build plate. I'm still learning to print smooth with PETG so you might have success with that. Prusa Mk 4…
I needed to find a way to suspend my Klipsch R52C center channel speaker from my fireplace mantle. The speaker was too tall to simply set on top.. so this was my quick solution. Built in Autodesk Fusion360. The original CAD file is…
The Tow-Pro Liberty trailer brake controller switch is installed into the switch panel of the Fourth generation (R52; 2012-2020) Nissan Pathfinder for a factory finish. I had to trim some plastic on the backside of the mounting bracket…
I printed this shifter grip for my 2005 MINI Cooper R52, but the hole was too long to lock into the shifter, meaning the handle would spin freely. I designed this extension to go between the shifter and the handle, and keep it from…
Print setting recommendations: PETG or better .16 layer height 2+ walls 10% Gyroid infill No supports required Most important thing here is the filament type. Don't use PLA. This is going in your car, it's going to get hot in there. 2…
This model does fit the common 256x256mm printers if the track is rotated by 22.5 degrees. You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors, tracks,…
About This is a replacement locking mechanism for a very common style of slow masticating juicer. The juicer appears to be a white label product sold under many brand names such as Aobosi, AUMATE, and Aicok, differing only in name and…
Printed with standard MK4 Input Shaper Structural Preset settings with Prusament PETG on a Powder coated Textured Plate. Designed for two 5 mm x 280 mm zip ties. This was intended for the Refresh 2005 and 2006 Mini R50 as well as the…
My 2006 R50 Mini Cooper's battery plastic support failed. So I designed a part that fits on top of the metal support and pushes against the battery box. The Air box mount then fits on top of the 3d printed part and the Mini/BMW Bolt then…
This is a currently untested mod to change out the 5.5mm ball bearings in the dual toolhead sensors. I am currently in the testing phase and waiting for my MR52ZZ bearings to come in. Anyone else that would like to test this, use at your…
OpenSCAD screwtop container customerizer generated storage container for MR52ZZ bearings. Printing material: PLA bottom / top layer: concentric infill: 15% OpenSCAD screwtop container customerizer settings The following settings were used…
About Storage tube for 16 MR52ZZ bearings (5mm outer diameter, 2mm inner diameter, 2.5mm height), the tiny bearing in the K1C extruder. It's a bit of a chonker, should help to actually find them back. Print instructions 2 walls and 15%…
The original clips on the window regulator cables broke when I was trying to replace the regulator in my Mini Cooper R52. The aftermarket regulator came with clips that clearly did not fit, so I modeled the original clip to print myself.…
About Storage tube for 16 MR52ZZ bearings (5mm outer diameter, 2mm inner diameter, 2.5mm height), the tiny bearing in the K1C extruder. It's a bit of a chonker, should help to actually find them back. Print instructions 2 walls and 15%…
This model does fit the common 256x256mm printers if the track is rotated by 22.5 degrees. You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors, tracks,…
This is a printed replacement gear stick bracket for an R50/R52/R53 Mini Cooper (model year 2001 - 2006 ). This bracket is designed to attach both the gear stick boot (leather fabric) and silver trim piece to the center console. Printing…
OpenSCAD screwtop container customerizer generated storage container for MR52ZZ bearings. Printing material: PLA bottom / top layer: concentric infill: 15% OpenSCAD screwtop container customerizer settings The following settings were used…
This is a currently untested mod to change out the 5.5mm ball bearings in the dual toolhead sensors. I am currently in the testing phase and waiting for my MR52ZZ bearings to come in. Anyone else that would like to test this, use at your…
This is a model I made for myself. Thought I would post it on here in case anyone found it useful.
This is a printed replacement gear stick bracket for an R50/R52/R53 Mini Cooper (model year 2001 - 2006 ). This bracket is designed to attach both the gear stick boot (leather fabric) and silver trim piece to the center console. Printing…
Requires a heat stake insert and a phone holder. Utilises the bolt holes on center console https://www.amazon.co.uk/gp/product/B08GY1VLDK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
