Parametric mSATA / M2 / M.2 / 2.5" SSD to 3.5" Drive Bay Adapter

This is my first parametric design in openSCAD. Please let me know if you encounter any issues.

These M2 / SSD adapters make it possible to mount two M2 SSDs or two 2.5" SSDs in one 3.5" hard drive mounting bay.

Please measure the height of your SSD before printing the dual SSD adapter as some SSDs are thicker.

The M2 Adapter is mounted without the case to improve cooling performance. The following adapter will fit "QNINE M.2 SSD Adapter to 2.5" SATA 3"

• Amazon.de https://www.amazon.de/QNINE-basierter-Schl%C3%BCssel-Unterst%C3%BCtzung-Festplatte/dp/B07RGT79WQ

• Amazon.com https://www.amazon.com/QNINE-Enclosure-Based-Converter-Support/dp/B07RNL4YJS/ref=sr\_1\_21?keywords=QNINE+M.2+SSD+Adapter&qid=1575278048&sr=8-21 The following mSATA Adapter has been tested with the "Dual mSATA Adapter Version"

• Amazon.de https://www.amazon.de/Hemore-Konverter-Adapter-Computer-Expansion/dp/B07GBXR9JG/ Print settings:
  They have been tested with PLA, 0.2mm layer, 10% gyroid infill, 4 solid top and bottom layers, 3 perimeters

• License: CC0 1.0 Universal (CC0 1.0) Public Domain Dedication

• SolidWorks Models: https://github.com/KaiserSoft/3D-Printing/tree/master/Dual%20M2%20%20or%202.5%20SSD%20Mounting%20Adapter

• Alternative Source: https://www.thingiverse.com/thing:4015614 Suggested OpenSCAD settings if you want to export your own STL files

• mSATA - both slots must be set to mSATA
  set both slots to mSATA, 6mm slot height, 3mm slot depth

• 98mm M.2 PCB
  may be combined with 98mm M.2 or 101mm SSD, 2mm slot height or 1.25mm if your printer is accurate, 3mm slot depth

• 101mm SSD
  may be combined with 98mm M.2 or 101mm SSD, set slot height above height of your SSD, 3mm slot depth Update 20191215
  Part width is adjusted for slot depth below 3mm to stay within 3.5"

  Update 20200929
  Added option for a stabilizer bar. This keeps both sides together even when not screwed into a drive slot.
  Added support for an mSATA adapter

• Support this design https://paypal.me/MirkoKaiser2020Thank You!

• Source Repo: https://github.com/KaiserSoft/3D-Printing/tree/master/Dual%20M2%20%20or%202.5%20SSD%20Mounting%20Adapter
• License: CC0 1.0 Universal (CC0 1.0) Public Domain Dedication

  Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

10%

Filament: DasFilament.de PLA silber

Category: Computer